GREENWATT brings the most advance Solar PV Testing Equipments from MULTI-JAPAN
NSEI-100D
This device can detect the disconnected & broken point of DC current lines between PV panels and power conditioners in PV systems, without cutting power off and without climbing the roof where PV modules are located.
MIS-PVS
IR Tester specialised for Photovoltaic Application.
Find Out Insulation Failure Point
Measure generated voltage 0-999V (DC )
MCM1600PV
Measures 16 Channel D.C Current continuously with P.C Connectivity.
Displays and memorizes the current at the selected intervals : 1 / 5 / 10 / 15 / 30 / 60 min
Memory of Approx. 20,000 data (72 days with 5 minutes interval)
MIS-PV1
IR Tester specialised for Photovoltaic Application.
Can make measurement properly during generation by PV systems.
Can work on 500V & 1000V Generation System both with PVH (1000V) & PVL (500V) Modes
MDLA-100A DC
This DC Leakage Current Monitor constantly observes leakage current of DC circuit like as PV generation system & lights up the warning lamp with signal output, when the leakage current exceeds the setting value.
Memory of Approx. 20,000 data (72 days with 5 minutes interval)
MSEI-100C
This model can measure insulation resistance of DC current circuit in PV systems (between PV module and power conditioner) on the live line and can distinguish the deteriorated part between Power Phase, Neutral Phase, P/N Phase and or PV modules
Contact Us
Fill the form we will contact you soon..!
